Crown Ferrite - Absorber Plastic Grain (APG)

Absorber Plastic Grain (APG) is a special plastic grain, include absorbent material with high percentage. It’s suitable for injection molding to produce complex shape to get a good performance to solve the EMI problem in wide band till 18GHz. We not only offer the grain, but also offer the injection molding OEM service.

PDF Version :

Features :

· Absorbent material inside plastic grain
· Suitable for injection molding application
· Suitable for complex shape design
· More thick with more absorption effect
· Recyclable
· RoHS Compliance
· For a product case, both sides can absorb EMI
· Not shielding material, with low electrical conductivity
· Good absorption performance in wide band (18GHz max.)

EMI / RFI Absorbers, Absorber Plastic Grain

Thickness - Return Loss chart of reference :

EMI / RFI Absorbers, Absorber Plastic Grain, Thickness - Return Loss chart of reference

Characteristics :

Characteristic	Test Method	Unit	APG-PP
Tensile Strength	ASTM D638	Kg/cm²	180
Tensile Modulus	ASTM D638	Kg/cm²	41,000
Elongation at break	ASTM D638	%	1.1
Flexural Strength	ASTM D790	Kg/cm²	400
Flexural Modulus	ASTM D790	Kg/cm²	40,000
Impact Strength	ASTM D256	Kg-cm/cm	6.8
Heat Distortion Temperature	ASTM D648 (66PSI)	^oC	120
Melt Index	ASTM D1238 (230^oC/2.16Kg)	g/10min	13.0
Shrinkage	ASTM D955	cm/cm	1.0
Specific Gravity	ASTM D792	g/cm³	2.5
Surface Resistance	ASTM D257	ohm	10⁵
RoHS 2.0 Compliance	-	-	2011/65/EU

Injection molding guide :

· Pre-drying condition : 80 - 100^oC 2-3hours

· Injection conditions :

EMI / RFI Absorbers, Absorber Plastic Grain, Injection molding guide

Mold Temperature	Barrel Heater 3	Barrel Heater 2	Barrel Heater 1
30 - 70^oC	190 - 230 ^oC	190 - 230 ^oC	180 - 220 ^oC